With the development of society, people are increasingly demanding buildings. The facades of buildings are beautifully shaped and beautiful. Architects are pursuing the design. How to change the shape by simply decorating the moldings to make it look newer. This can not be separated from decorative lines and accessories. Then, Xiaobian will introduce you to the types of molding installations and moldings.
Decorative line installation
Decorative line construction tools include saw blades, hand saws, tape measures, squares, wire brushes, hammers, steel nails, and the like. Prepare before construction. Before the construction, it is also necessary to check whether the wall surface is flat. It is required that the flat surface be free from projections or foreign objects, etc. It should be filled in places where some depressions are formed. Ensure that the plane error does not exceed 5 mm.
The installation of the wall line is generally made of cement mortar. The mortars used in the construction are special-purpose adhesive mortars and surface layer polymer anti-cracking mortars. It is better to mix it by hand. The water should be less, and the ratio of water and mortar should be kept at about 1 to 5. To add water and stir, in the process, the mortar must be mixed evenly and moderately. This is more conducive to sticking and reducing shedding. When plastering, try to wipe the cement mortar in place, but wipe it thin and then squeeze it hard. This works best. For some larger objects, it is best to temporarily strengthen the support.
Installation is a meticulous task. The installation gap also affects the appearance. It is generally maintained at about 3 mm. If it is less than 3 mm, it is best to be sanded on the second day. If the gap is too large, it must be stuffed so that the error is no more than 1 mm.
In addition to seams, there are various points of attention. For example, when sticking a wall line to some circular columns, special attention must be paid to the width of the wall line, and the upper and lower plate lines should also be carefully studied. For some rectangular columns, we must consider that there should be no cracks, and the quality is mainly concentrated at a 45-degree angle to prevent it from falling off.
In some doors or sill places, marble lines must be strictly non-joint, to ensure that inside and outside the same, to maintain the appearance. Be sure to hit the bottom before installing. In this way, the gap will not be obvious. There are also some unique bold designs in the interior that will also use the exterior wall line. The wall line of the exterior wall is used indoors. Attention should be paid to the meticulousness of the construction. Do not scratch or dig the wall to keep the wall clean.
Types of decorative lines
1, imitation marble lines
The raw material for the marble line that sells better in the market is nanometer stone powder, which has the texture of stone, hard texture, and is not easy to be deformed. It is easy to install and the surface texture is made by water transfer printing technology. It is clear and natural, with various styles. Mainly used for TV background walls, elevator door covers, waistline, baseboards, closing lines and so on.
2, wood lines
Wood lines are hardwood, fine-grained, wear-resistant, corrosion-resistant, non-cracked, smooth-cut, well-processed, paint-colored, good-adhesive, nail-strength wood, after drying, Machined or hand-machined. The lines are beautiful and smooth, the wood grain is clear and beautiful, the surface is not frugal, it does not deform after use, does not have leather, and is durable. It is an environmental protection material.
3, stainless steel line
Cold-pressed stainless steel molding molding, strict selection of the perfect combination, elegant shape, gorgeous and exquisite appearance, product structure is solid, durable, easy to scale, not easy to rust, easy to clean, is a one-time investment.
4, PS line
PS line of raw materials is polystyrene, light weight products, impact resistance, high strength, excellent water resistance, good toughness, can be recycled secondary use, green environmental protection. PS lines are also commonly used in the production of picture frames, picture frames, and picture frames. They are low in cost, have various styles and are popular with consumers.
5, PVC lines
PVC decorative lines have the characteristics of light weight, heat insulation, heat preservation, moisture-proof, fire-retardant, and easy construction. With a wide range of specifications, colors and patterns, it is highly decorative, has good stability, good dielectric properties, durability, anti-aging, easy fusion and adhesion, and has a wide range of decorative applications.
6, GRC lines
GRC decorative line is a kind of fiber cement composite material using alkali-resistant glass fiber as reinforcement material and cement mortar as matrix material. It is light, high-strength and high-strength through the production process of spraying, vertical mold pouring, extrusion and flow-through. Tough and versatile new inorganic composites are used outdoors.
7, stone line
The stone line is made of natural stone and used in indoor and outdoor buildings. The common stone lines are marble lines, granite lines, and sandstone lines. The decoration effect is very good, but the price is relatively expensive and difficult to maintain.
The characteristics of decorative lines
1, light weight. EPS line aggregates are poly stunted ethylene. The weight of finished products is about 1/6 of the GRC decorative line, and one person can move and construct it at will.
2, paste firmly. EPS decoration line is mainly used to bond polymer mortar with the wall surface. The polymer mortar is made by adding organic glue to the cement mortar of inorganic materials. The service life is long, the bonding is firm, and there are already national standards and specifications. It is proved to be safe and reliable in a large number of engineering applications, thus avoiding the hidden dangers of anchor bolt construction and anchor bolt corrosion, and also completely solving the problems of exterior and exterior thermal insulation cold and thermal bridges.
3, the shape of random processing. The EPS lines are computer-designed, automatically cut, and the production period is short.
4, easy to install. With a special adhesive material and method, one can install the construction, especially the large-scale line engineering, just stick and install.
5, seamless between lines. The gap filling material used in the EPS decorative lines is the same as the wall adhesive, and the gap disappears completely, and cracks do not appear in the subsequent use.
Editing summary: About the installation of decorative lines and the types of decorative lines are introduced here, and I hope to be helpful to everyone. If you want to know more related information, you can pay attention to this website information.
Tweezer Set,Personalized Tweezers,Surgical Tweezers,Smart Tweezers
YANGJIANG TRI-WIN INDUSTRY & TRADE CO.,LTD , https://www.triwintableware.com